Exhibit 10.7

AMENDED AND RESTATED MOLTEN METAL SUPPLY AGREEMENT

between

NOVELIS INC.

(as Purchaser)

and

RIO TINTO ALCAN INC.

(as Supplier)

for the Supply of Molten Metal to Purchaser’s Saguenay Works Facility

Dated as of January 1, 2008

TABLE OF CONTENTS

1. DEFINITIONS AND INTERPRETATION			1
2. MOLTEN METAL			6
3. FORCE MAJEURE			11
4. ASSIGNMENT			13
5. TERM AND TERMINATION			14
6. EVENTS OF DEFAULT			15
7. DISPUTE RESOLUTION			16
8. MISCELLANEOUS			19

SCHEDULES

1		Contract Tonnage and Estimated Weekly Shipping Schedule for Contract Year 1
2		Saguenay Smelters

AMENDED AND RESTATED MOLTEN METAL SUPPLY AGREEMENT

THIS AGREEMENT entered into in the City of Montréal, Province of Quebec, as of January 1, 2008.

BETWEEN:		NOVELIS INC., a corporation organized under the Canada Business Corporations Act (“Novelis” or the “Purchaser”);
AND:		RIO TINTO ALCAN INC. (formally known as Alcan Inc.), a corporation organized under the Canada Business Corporations Act (“Alcan” or the “Supplier”).
RECITALS:

WHEREAS the Parties entered into a Molten Metal Supply Agreement dated January 5, 2005 (the “Original Agreement”) relating to the supply of Molten Metal by the Supplier to the Purchaser for the Purchaser’s Saguenay Works facility; and

WHEREAS the Parties wish to modify certain of the terms and conditions of the Original Agreement and amend and restate the Original Agreement by this Agreement.

NOW THEREFORE, in consideration of the mutual agreements, covenants and other provisions set forth in this Agreement, the Parties hereby agree as follows:

1. DEFINITIONS AND INTERPRETATION

1.1		Definitions
		For the purposes of this Agreement, the following terms and expressions and variations thereof shall, unless another meaning is clearly required in the context, have the meanings specified or referred to in this Section 1.1:
		“Affected Party” has the meaning set forth in Section 3.1.
		“Affiliate” of any Person means any other Person that, directly or indirectly, controls, is controlled by, or is under common control with such first Person as of the date on which or at any time during the period for when such determination is being made. For purposes of this definition, “control” means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of such Person, whether through the ownership of voting securities or other interests, by contract or otherwise and the terms “controlling” and “controlled” have meanings correlative to the foregoing.
		“Agreement” means this Amended and Restated Molten Metal Supply Agreement, including all of the Schedules hereto.

 2

		“Alcan” means Rio Tinto Alcan Inc. and its successors and permitted assigns.
		“Alcan Group” means Alcan and its Subsidiaries from time to time .
		“Applicable Law” means any applicable law, rule or regulation of any Governmental Authority or any outstanding order, judgment, injunction, ruling or decree by any Governmental Authority.
		“Base Contract Tonnage” means in respect of each Contract Year, *** Tonnes, subject to reduction in accordance with Section 2.3(c) and Section 2.4(b).
		“Bill of Lading Date” means the date of the bill of lading representing Molten Metal cargo to be delivered under this Agreement.
		“Business Concern” means any corporation, company, limited liability company, partnership, joint venture, trust, unincorporated association or any other form of association.
		“Business Day” means any day excluding (i) Saturday, Sunday and any other day which, in the City of Montréal (Canada) or in the City of New York (United States), is a legal holiday, or (ii) a day on which banks are authorized by Applicable Law to close in the city of Montréal (Canada) or in the city of New York (United States).
		“Commercially Reasonable Efforts” means the efforts that a reasonable and prudent Person desirous of achieving a business result would use in similar circumstances to ensure that such result is achieved as expeditiously as possible in the context of commercial relations of the type contemplated in this Agreement; provided, however, that an obligation to use Commercially Reasonable Efforts under this Agreement does not require the Person subject to that obligation to assume any material obligations or pay any material amounts to a Third Party or take actions that would reduce the benefits intended to be obtained by such Person under this Agreement.
		“Consent” means any approval, consent, ratification, waiver or other authorization.
		“Contract Price” for each Tonne of Molten Metal sold and purchased hereunder in any month shall be:

(i)

in respect of each month occurring during the initial Term (Contract Year *** to Contract Year ***, inclusive); the Midwest Price minus the Molten Metal Discount; and

(ii)

in respect of each month occurring during any extension of the Term, such price as may be agreed by the Purchaser and the Supplier as a result of good faith negotiations in connection with any extension of the Term pursuant to Section 5.2 hereof.

		Such amount shall be rounded upwards to the nearest Dollar.
		“Contract Tonnage” has the meaning set forth in Section 2.3(c).
		“Contract Year” means each calendar year during the Term and any extension thereof.
		“CPT” means, to the extent not inconsistent with the provisions of this Agreement, CPT as defined in Incoterms 2000, published by the ICC, Paris, France, as amended from time to time.
		“Default Interest Rate” means the rate of interest charged by Supplier from time to time on late payments in accordance with Supplier’s normal commercial practice, as indicated on invoices issued by Supplier to Purchaser hereunder.
		“Defaulting Party” has the meaning set forth in Section 6.
		“Delivery Site” means the Purchaser’s Saguenay Works facility located at 2040 Fay Street, Jonquière, Quebec, Canada.
		“Disputes” has the meaning set forth in Section 7.1.
		“Dollars” or “$” means the lawful currency of the United States of America.
		“Event of Default” has the meaning set forth in Section 6.
		“Force Majeure” has the meaning set forth in Section 3.2.
		“Governmental Authority” means any court, arbitration panel, governmental or regulatory authority, agency, stock exchange, commission or body.
		“Governmental Authorization” means any Consent, license, certificate, franchise, registration or permit issued, granted, given or otherwise made available by, or under the authority of, any Governmental Authority or pursuant to any Applicable Law.
		“Group” means Alcan Group or Novelis Group, as the context requires.
		“ICC” means the International Chamber of Commerce.

		“Incoterms 2000” means the set of international rules updated in the year 2000 for the interpretation of the most commonly used trade terms for foreign trade, as published by the ICC.
		“Information” means any information, whether or not patentable or copyrightable, in written, oral, electronic or other tangible or intangible forms, stored in any medium, including studies, reports, test procedures, research, records, books, contracts, instruments, surveys, discoveries, ideas, concepts, know-how, techniques, manufacturing techniques, manufacturing variables, designs, specifications, drawings, blueprints, diagrams, models, prototypes, samples, products, product plans, flow charts, data, computer data, disks, diskettes, tapes, computer programs or other software, marketing plans, customer information, customer services, supplier information, communications by or to attorneys (including attorney-client privileged communications), memos and other materials prepared by attorneys or under their direction (including attorney work product), and other technical, financial, employee or business information or data.
		“LME” means the London Metal Exchange.
		“Midwest Price” for any calendar month means the arithmetic average of the mid-west transaction prices for primary high grade aluminum, as published in Platt’s Metals Week on each day during the calendar month preceding such calendar month or as otherwise determined pursuant to Section 2.6(b). As an example, the Midwest Price for the month of April will be based on metal prices published during the month of March.
		“Molten Metal” means P1020 aluminum metal in molten form.
		“Molten Metal Discount” means, (i) for each of Contract Year *** to Contract Year ***, inclusive, the Molten Metal Discount for the preceding Contract Year multiplied by a factor equal to *** of the preceding Contract Year’s US PPI increase (or decrease); and (ii) for any Contract Year after Contract Year ***, such amount as may be agreed by the Purchaser and the Supplier as a result of good faith negotiations in connection with any extension of the Term pursuant to Section 5.2. For the purposes hereof, the Molten Metal Discount for the year preceding Contract Year *** shall be deemed to be $*** per Tonne.
		“Novelis” means Novelis Inc. and its successors and permitted assigns.
		“Novelis Group” means Novelis and its Affiliates from time to time.

		“Ordinary Course of Business” means any action taken by a Person that is in the ordinary course of the normal, day-to-day operations of such Person and is consistent with the past practices of such Person.
		“Original Agreement” has the meaning set out in the Preamble to this Agreement.
		“Party” means each of the Purchaser and the Supplier as a party to this Agreement and “Parties” means both of them.
		“Person” means any individual, Business Concern or Governmental Authority.
		“Purchaser” has the meaning set forth in the Preamble to this Agreement.
		“Representatives” means, with respect to any Person, any of such Person’s directors, officers, employees, agents, consultants, advisors, accountants or attorneys.
		“Saguenay Smelter” means those aluminum smelters of the Supplier identified in Schedule 2.
		“Saguenay Works” means the Purchaser’s light gauge rolled products facility at Jonquière, Quebec, Canada.
		“Sales Tax” means any sales, use, consumption, goods and services, value added or similar tax, duty or charge imposed by a Governmental Authority pursuant to Applicable Law.
		“Separation Agreement” means the Separation Agreement dated December 31, 2004 between the Parties, as amended, restated or modified from time to time.
		“Specifications” means such specifications for Molten Metal as may be proposed from time to time in accordance with Section 2.7.
		“Subsidiary” of any Person means any corporation, partnership, limited liability entity, joint venture or other organization, whether incorporated or unincorporated, of which a majority of the total voting power of capital stock or other interests entitled (without the occurrence of any contingency) to vote in the election of directors, managers or trustees thereof, is at the time owned or controlled, directly or indirectly, by such Person.
		“Supplier” has the meaning set forth in the Preamble to this Agreement.
		“Term” has the meaning set forth in Section 5.1.
		“Terminating Party” has the meaning set forth in Section 6.

		“Third Party” means a Person that is not a Party to this Agreement, other than a member or an Affiliate of Alcan Group or a member or an Affiliate of Novelis Group.
		“Tonne” means 1,000 kilograms.
		“US PPI” means the Producer Price Index for industrial commodities (Series Id: WPUSOP2000), as published monthly by the Bureau of Labor Statistics of the U.S. Department of Labor.
1.2		Currency All references to currency herein are to Dollars unless otherwise specified.
1.3		Vienna Convention
		The Parties agree that the terms of the United Nations Convention (Vienna Convention) on Contracts for the International Sale of Goods (1980) shall not apply to this Agreement or the obligations of the Parties hereunder.
2.		MOLTEN METAL
2.1		Supply and Sale by the Supplier

	(a)		Subject to the terms and conditions of this Agreement, beginning on the date hereof and continuing throughout the Term of this Agreement, the Supplier shall supply and sell to the Purchaser “CPT the Delivery Site” the quantities of Molten Metal determined in accordance with this Agreement.
	(b)		The Supplier shall supply Molten Metal produced by the Supplier from a Saguenay Smelter of the Supplier’s choosing or from such other sources and locations as may be agreed.

2.2		Purchase by the Purchaser
		Subject to the terms and conditions of this Agreement, beginning on the date hereof and continuing throughout the Term of this Agreement, the Purchaser shall purchase and take delivery from the Supplier “CPT the Delivery Site” the quantities of Molten Metal determined in accordance with this Agreement.

2.3

Quantities of Molten Metal Required by the Purchaser

(a)

The Purchaser agrees to purchase and the Supplier agrees to supply, in each Contract Year, Contract Tonnage of no more than the Base Contract Tonnage applicable for such Contract Year and no less than eighty percent (80%) of the Base Contract Tonnage applicable for such Contract Year as specified by the

			Purchaser pursuant to Section 2.3(c) below. The purchase and supply, as applicable, by the Parties, of any greater quantity shall be subject to further agreement of the Parties, at each Party’s discretion.
	(b)		The Parties shall use Commercially Reasonable Efforts to arrange for shipping and delivery schedules to be approximately evenly spread on a daily and weekly basis throughout each Contract Year.
	(c)		On or before October 31 in each Contract Year, the Purchaser shall submit to the Supplier a notice setting forth the annual quantity of Molten Metal required for the next succeeding Contract Year (the “Contract Tonnage” for such Contract Year), which shall be no less than 80% of the Base Contract Tonnage applicable to the next succeeding Contract Year, and no more than the Base Contract Tonnage for such Contract Year, and an estimated shipping schedule and quantities of Molten Metal to be purchased in each week of such Contract Year; in establishing such shipping schedule, the Purchaser shall endeavour to divide the Contract Tonnage as evenly as possible for delivery throughout each day and each week in the Contract Year. The Contract Tonnage for Contract Year 1, and the estimated shipping schedule and quantities of Molten Metal to be delivered in each week during Contract Year 1, are set out in Schedule 1 hereto.

2.4

Other Terms Affecting Quantity

	(a)		Throughout the Term of this Agreement, the Purchaser shall be entitled to request reductions in the amount of Molten Metal to be delivered in any week by the Supplier hereunder by notice to the Supplier, and the Supplier shall adjust its shipments so as to provide such reduced amount in such week, provided such reduction is made in connection with either (i) a planned maintenance shutdown of the Purchaser’s facilities at Saguenay Works or (ii) a statutory holiday falling in such week, and the Parties have agreed on the timing for any such maintenance shut down or variation in quantity. The Parties shall use their Commercially Reasonable Efforts to reach agreement under this Section 2.4(a) with a view to avoiding production disruptions or inventory buildup. Any reduction of weekly supply pursuant to this Section 2.4(a) shall not affect the obligations of the Purchaser and the Supplier under Section 2.3(a).
	(b)		The quantity of Molten Metal which the Purchaser agrees to purchase and the Supplier agrees to supply hereunder shall be subject to reduction in the event the Supplier provides notice to the Purchaser that one or more of the Saguenay Smelters owned by the Supplier has been temporarily or permanently shut down by the Supplier, provided such shut down has occurred as a result of a good faith decision by the Supplier that the continued operation of such Saguenay Smelter would be uneconomic or otherwise unviable for the Supplier or non value-maximizing for the Supplier. The reduction shall be for such

			quantity as may be agreed by the Parties and, failing agreement, shall be for such quantity as is equal to the Contract Tonnage multiplied by the annual reduction capacity of the Saguenay Smelters (or Smelter) that has (or have) been shut down, and divided by the total annual production capacity of all Saguenay Smelters before giving effect to the shut down. Supplier shall provide not less than 18 months prior notice to Purchaser before invoking this provision.
	(c)		Subject to the Parties’ obligations to purchase and supply, as applicable, the Contract Tonnage in each Contract Year on the terms of this Section 2, the Parties shall consult at least once a week in order to agree on the quantities of Molten Metal to be supplied on a daily basis. The Supplier will use Commercially Reasonable Efforts to allocate Molten Metal produced by the Supplier on a fair basis between the Purchaser and facilities of the Supplier or its Affiliates that require Molten Metal.

2.5

Supplier’s Shipping Obligations

	(a)		The Supplier shall supply to the Purchaser, in accordance with the terms hereof, in each week, such quantity of Molten Metal as is identified by the Purchaser in respect of such week in a notice pursuant to Section 2.3(c) hereof, subject to any reduction in accordance with Section 2.4.
	(b)		Notwithstanding the provisions of Incoterms 2000 and Section 2.10, the Supplier acknowledges its responsibility to make all necessary arrangements for the transportation of Molten Metal to the Delivery Site on behalf of the Purchaser. The Supplier shall act as the disclosed agent of the Purchaser in entering into contracts for hiring carriers for the shipment of Molten Metal under this Agreement. In doing this, the Supplier shall use Commercially Reasonable Efforts to obtain the most competitive freight rates and shall obtain approval from the Purchaser before entering into any long term contracts for hiring carriers on behalf of the Purchaser. The Supplier shall use Commercially Reasonable Efforts to ensure that such transportation is suitable for delivering Molten Metal to the Delivery Site.

2.6

Price

	(a)		The price payable by the Purchaser to the Supplier for each Tonne of Molten Metal sold and purchased pursuant to Sections 2.1 and 2.2 shall be the Contract Price. The date used for calculating the Contract Price for any shipment of Molten Metal shall be the Bill of Lading Date.
	(b)		In the event that Platt’s Metal Week ceases to be published or ceases to publish the relevant reference price for determining the Midwest Price, the Parties shall meet with a view to agreeing on an alternative publication or, as applicable, an alternative reference price. If the Parties fail to reach an agreement within

sixty (60) days of any Party having notified the other to enter into discussions to agree to an alternative publication or reference price, then the Chairman of the LME in London, England or his nominee shall be requested to select a suitable reference in lieu thereof and an appropriate amendment to the terms of this Section 2.6. The decision of the Chairman or his nominee shall be final and binding on the Parties.

2.7

Quality

	(a)		Molten Metal supplied under this Agreement shall comply with the definition of “Molten Metal” set forth in Section 1.1. The Supplier shall use Commercially Reasonable Efforts to notify the Purchaser prior to shipment of any Molten Metal that does not meet this description. The Purchaser shall not be required to accept delivery of any Molten Metal that does not meet this description. If the Purchaser does not accept delivery of Molten Metal not meeting this description, the Supplier’s obligation shall be limited to the assumption of all costs for return of such Molten Metal to the Supplier, and for the delivery of replacement Molten Metal to the Purchaser. All other express or implied warranties, conditions and other terms relating to Molten Metal hereunder, including warranties relating to merchantability or fitness for a particular purpose, are hereby excluded to the fullest extent permitted by Applicable Law.
	(b)		The Purchaser may from time to time propose that Molten Metal to be supplied hereunder comply with additional specifications. The Supplier shall use Commercially Reasonable Efforts to agree to such proposed modifications or additions.

2.8

Payment

	(a)		The Purchaser shall pay the Supplier in full, in accordance with Supplier’s commercial invoice, for each shipment of Molten Metal meeting the Specifications for P1020 aluminum metal or otherwise accepted by Purchaser. Payment shall be made on the first (1st) day and fourteenth (14th) day of each month during the Term(each a “Payment Date”), or if such day is not a Business Day, then on the immediately following Business Day. Payment shall be made on each Payment Date in respect of all invoices issued more than 30 days prior to such payment date and not previously paid, with invoices issued after such date being payable on the next following Payment Date.
	(b)		If the Purchaser believes that a shipment of Molten Metal does not meet the description of Molten Metal as defined in this Agreement and has rejected such shipment in a timely manner in accordance with the terms hereof, it need not pay the invoice. However, if the Purchaser subsequently accepts that the Molten Metal complies with the requirements of this Agreement, the Purchaser

			shall pay the invoice and, if payment is overdue pursuant to Section 2.8(a) above, interest in accordance with Section 2.8(c).
	(c)		If any payment required to be made pursuant to Section 2.8(a) above is overdue, the full amount shall bear interest at a rate per annum equal to the Default Interest Rate calculated on the actual number of days elapsed, accrued from and excluding the date on which such payment was due, up to and including the actual date of receipt of payment in the nominated bank or banking account.
	(d)		All amounts paid to the Supplier or the Purchaser hereunder shall be paid in Dollars by wire transfer in immediately available funds or by ACH to the account specified by the Supplier or Purchaser, as applicable, by notice from time to time by one Party to the other hereunder.
	(e)		If any Party fails to purchase or supply, as applicable, any quantity of Molten Metal in any month as required under the terms of this Agreement, such Party shall be liable to the other Party for all direct damages, losses and costs resulting from such failure, provided that such other Party shall use its Commercially Reasonable Efforts to mitigate such damages, losses and costs.

2.9		Delivery
		Molten Metal shall be delivered CPT the Delivery Site. The delivery of Molten Metal pursuant to this Section 2.9 shall be governed by Incoterms 2000, as amended from time to time.
2.10		Title and Risk of Loss
		Title to and risk of damage to and loss of Molten Metal shall pass to the Purchaser as the Molten Metal is delivered by the Supplier to the carrier.

2.11		Purchaser as Principal
		The Purchaser warrants that all Molten Metal to be purchased hereunder shall be purchased for Purchaser’s own consumption. The Purchaser agrees that it shall not re-sell or otherwise make available to any Person any Molten Metal purchased from the Supplier hereunder, other than in respect of transactions undertaken in small quantities by the Purchaser to balance purchases or Purchaser’s metal position.

2.12		Continuous Supply Chain Improvement
		The Parties shall form a work group comprised of four representatives of each Party to identify opportunities to improve the supply chain, to agree on performance metrics and to determine appropriate financial penalties and incentives relative to target performance levels. The Parties shall use Commercially Reasonable Efforts to complete such process by June 30, 2008. This Agreement, including Schedule 3, will

          be modified accordingly to reflect any agreements reached by the Parties in connection with such process.

3.

FORCE MAJEURE

3.1

Effect of Force Majeure

No Party shall be liable for any loss or damage that arises directly or indirectly through or as a result of any delay in the fulfilment of or failure to fulfil its obligations in whole or in part (other than the payment of money as may be owed by a Party) under this Agreement where the delay or failure is due to Force Majeure. The obligations of the Party affected by the event of Force Majeure (the “Affected Party”) shall be suspended, to the extent that those obligations are affected by the event of Force Majeure, from the date the Affected Party first gives notice in respect of that event of Force Majeure until cessation of that event of Force Majeure (or the consequences thereof).

3.2		Definition
		“Force Majeure” shall mean any act, occurrence or omission (or other event), subsequent to the commencement of the Term hereof, which is beyond the reasonable control of the Affected Party including, but not limited to: fires, explosions, accidents, strikes, lockouts or labour disturbances, floods, droughts, earthquakes, epidemics, seizures of cargo, wars (whether or not declared), civil commotion, acts of God or the public enemy, action of any government, legislature, court or other Governmental Authority, action by any authority, representative or organisation exercising or claiming to exercise powers of a government or Governmental Authority, compliance with Applicable Law, blockades, power failures or curtailments, inadequacy or shortages or curtailments or cessation of supplies of raw materials or other supplies, failure or breakdown of equipment of facilities, the invocation of Force Majeure by any party to an agreement under which any Party’s operations are affected, and any declaration of Force Majeure by the facility producing the Molten Metal, or any other event beyond the reasonable control of the Parties whether or not similar to the events or occurrences enumerated above. In no circumstances shall problems with making payments constitute Force Majeure.
3.3		Notice
		Upon the occurrence of an event of Force Majeure, the Affected Party shall promptly give notice to the other Party hereto setting forth the details of the event of Force Majeure and an estimate of the likely duration of the Affected Party’s inability to fulfil its obligations under this Agreement. The Affected Party shall use Commercially Reasonable Efforts to remove the said cause or causes and to resume, with the shortest possible delay, compliance with its obligations under this Agreement, provided that the Affected Party shall not be required to settle any strike,

lockout or labour dispute on terms not acceptable to it. When the said cause or causes have ceased to exist, the Affected Party shall promptly give notice to the other Party that such cause or causes have ceased to exist.

3.4		Pro Rata Allocation
		If the Supplier’s supply of any Molten Metal to be delivered to the Purchaser is stopped or disrupted by an event of Force Majeure, the Supplier shall have the right to allocate its available supplies of such Molten Metal, if any, among any or all of its existing customers whether or not under contract, in a fair and equitable manner. In addition, where the Supplier is the Affected Party, it may (but shall not be required to) offer to supply, from another source, Molten Metal of similar quality in substitution for the Molten Metal subject to the event of Force Majeure to satisfy that amount which would have otherwise been sold and purchased hereunder at a price which may be more or less than the price hereunder.
3.5		Consultation
		Within thirty (30) days of the cessation of the event of Force Majeure, the Parties shall consult with a view to reaching agreement as to the Supplier’s obligation to provide, and the Purchaser’s obligation to take delivery of, that quantity of Molten Metal that could not be sold and purchased hereunder because of the event of Force Majeure, provided that any such shortfall quantity has not been replaced by substitute Molten Metal pursuant to the terms above.
		In the absence of any agreement by the Parties, failure to deliver or accept delivery of Molten Metal which is excused by or results from the operation of the foregoing provisions of this Section 3 shall not extend the Term of this Agreement and the quantities of Molten Metal to be sold and purchased under this Agreement shall be reduced by the quantities affected by such failure.

3.6

Termination

	(a)		If an event of Force Majeure where the Affected Party is the Purchaser shall continue for more than *** consecutive calendar months, then the Supplier shall have the right to terminate this Agreement.
	(b)		If an event of Force Majeure where the Affected Party is the Supplier shall continue for more than *** consecutive calendar months, then the Purchaser shall have the right to terminate this Agreement.

4.		ASSIGNMENT
4.1		Prohibition on Assignments
		No Party shall assign or transfer this Agreement, in whole or in part, or any interest or obligation arising under this Agreement, except as permitted by Section 4.2, without the prior written consent of the other Party.
4.2		Assignment within Alcan Group or Novelis Group

(a)

With the consent of Novelis, such consent not to be unreasonably withheld or delayed, Alcan may elect to have one or more of the Persons comprising the Alcan Group assume the rights and obligations of the Supplier under this Agreement, provided that

	(i)		Alcan shall remain fully liable for all obligations of the Supplier hereunder, and
	(ii)		the transferee will remain at all times a member of the Alcan Group;

	any such successor to Alcan as a Supplier under this Agreement shall be deemed to be the “Supplier” for all purposes of the Agreement.
	(b)		With the consent of Alcan, such consent not to be unreasonably withheld or delayed, Novelis may elect to have one or more of the Persons comprising the Novelis Group assume the rights and obligations of the Purchaser under this Agreement, provided that

***

Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions.

	(i)		Novelis shall remain fully liable for all obligations of the Purchaser hereunder, and
	(ii)		the transferee will remain at all times a member of the Novelis Group;

any such successor to Novelis as Purchaser under this Agreement shall be deemed to be the “Purchaser” for all purposes of this Agreement.

5.

TERM AND TERMINATION

5.1		Term
		The term of this Agreement (the “Term”) shall commence on *** and terminate on ***, unless terminated earlier or extended pursuant to the provisions of this Agreement.

5.2		Extension
		One year prior to the expiration of the Term or any extension thereof, the Parties, upon the request of either Party, shall meet to negotiate in good faith a possible extension of the Term for a further period on terms to be mutually agreed (including in respect of quantities of Molten Metal to be purchased and supplied hereunder and pricing to apply in such further period). If no such agreement is reached between the Parties, the Agreement shall terminate upon expiry of the Term or relevant extension thereof.

5.3		Termination
		This Agreement shall terminate:

	(a)		upon expiry of the Term;
	(b)		upon the mutual agreement of the Parties prior to the expiry of the Term;
	(c)		pursuant to Section 3.6 as a result of Force Majeure; or
	(d)		following the occurrence of an Event of Default, in accordance with Section 6.

***

Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions.

6.

EVENTS OF DEFAULT

6.1		This Agreement may be terminated in its entirety immediately at the option of a Party (the “Terminating Party”), in the event that an Event of Default occurs in relation to the other Party (the “Defaulting Party”), and such termination shall take effect immediately upon the Terminating Party providing notice to the Defaulting Party of the termination.
		For the purposes of this Agreement, each of the following shall individually and collectively constitute an “Event of Default” with respect to a Party:

	(a)		such Party defaults in payment of any payments which are due and payable by it pursuant to this Agreement, and such default is not cured within thirty (30) days following receipt by the Defaulting Party of notice of such default;
	(b)		such Party breaches any of its material obligations pursuant to this Agreement (other than as set out in paragraph (a) above), and fails to cure it within sixty (60) days after receipt of notice from the non-defaulting Party specifying the default with reasonable detail and demanding that it be cured, provided that if such breach is not capable of being cured within sixty (60) days after receipt of such notice and the Party in default has diligently pursued efforts to cure the default within the sixty (60) day period, no Event of Default under this paragraph (b) shall occur;
	(c)		such Party breaches any material representation or warranty, or fails to perform or comply with any material covenant, provision, undertaking or obligation in or of the Separation Agreement;
	(d)		in relation to the Purchaser (1) upon the occurrence of a Non Compete Breach (as defined in the Separation Agreement) and the giving of notice of the termination of this Agreement by Alcan to Novelis pursuant to Section 14.03(b) of the Separation Agreement and pursuant to this paragraph of this Agreement, or (2) upon the occurrence of a Change of Control Non Compete Breach (as defined in the Separation Agreement) and the giving of notice of the termination of this Agreement by Alcan to Novelis pursuant to Section 14.04(e) of the Separation Agreement, in which event the termination of this Agreement shall be effective immediately upon Alcan providing Novelis notice pursuant to Section 14.03(b) or Section 14.04(e) of the Separation Agreement;
	(e)		such Party (i) is bankrupt or insolvent or takes the benefit of any statute in force for bankrupt or insolvent debtors, or (ii) files a proposal or takes any action or proceeding before any court of competent jurisdiction for dissolution, winding-up or liquidation, or for the liquidation of its assets, or a receiver is appointed in respect of its assets, which order, filing or appointment is not rescinded within sixty (60) days; or

(f)

proceedings are commenced by or against such Party under the laws of any jurisdiction relating to reorganization, arrangement or compromise.

7.		DISPUTE RESOLUTION
7.1		Disputes
		The provisions of this Section 7 shall govern all disputes, controversies or claims (whether arising in contract, delict, tort or otherwise) between the Parties that may arise out of, or relate to, or arise under or in connection with, this Agreement (a “Dispute”).
7.2		Negotiation
		The Parties hereby undertake to attempt in good faith to resolve any Dispute by way of negotiation between senior executives who have authority to settle such Dispute. In furtherance of the foregoing, any Party may initiate the negotiation by way of a notice (an “Escalation Notice”) demanding an in-person meeting involving representatives of the Parties at a senior level of management of the Parties (or if the Parties agree, of the appropriate strategic business unit or division within such Party). A copy of any Escalation Notice shall be given to the Chief Legal Officer of each Party (which copy shall state that it is an Escalation Notice pursuant to this Agreement). Any agenda, location or procedures for such negotiation may be established by the Parties from time to time; provided, however, that the negotiation shall be completed within thirty (30) days of the date of the Escalation Notice or within such longer period as the Parties may agree in writing prior to the expiration of the initial thirty-day period.
7.3		Mediation

	(a)		If the Dispute has not been resolved by negotiation as provided in Section 7.2 within thirty (30) days of the date of the Escalation Notice or such extended period as may be agreed by the Parties, or should the Parties fail to meet within the said thirty-day period, the Parties shall endeavour to settle the Dispute by mediation. The Party wishing to refer a Dispute to mediation shall give written notice to the other (the “Mediation Notice”) describing the Dispute, requiring that the Dispute be submitted to mediation and proposing the name of a suitable person to be appointed mediator.
	(b)		If the other Party rejects the proposed mediator and the Parties are unable to agree on a mediator within fifteen (15) days of the Mediation Notice, then either Party may request the CPR Institute for Dispute Resolution to appoint a mediator from the CPR Panel of Distinguished Neutrals.
	(c)		The mediator shall be entitled to make recommendations to the Parties which, unless the Parties agree otherwise, shall not be binding upon them.

	(d)		The mediation shall continue until the earliest to occur of the following: (i) the Parties reach agreement as to the resolution of the Dispute, (ii) the mediator makes a finding that there is no possibility of resolution through mediation, or (iii) sixty (60) days have elapsed since the appointment of the mediator.
	(e)		Each Party shall bear its own costs in connection with the mediation; the fees and disbursements of the mediator shall be borne equally by the Parties.
	(f)		If the Parties accept any recommendation made by the mediator or otherwise reach agreement as to the resolution of the Dispute, such agreement shall be recorded in writing and signed by the Parties, whereupon it shall become binding upon the Parties and have, as between them, the authority of a final judgment or arbitral award (res judicata).
	(g)		The mediation shall be confidential and neither the Parties (including their auditors and insurers) nor their counsel and any Person necessary to the conduct of the mediation nor the mediator or any other neutral involved in the mediation shall disclose the existence, content (including submissions made, positions adopted and any evidence or documents presented or exchanged), or outcome of any mediation hereunder without the prior written consent of the Parties, except as may be required by Applicable Law or the applicable rules of a stock exchange.
	(h)		In the event that a Dispute is referred to arbitration in accordance with Section 7.4 below, the mediator or any other neutral involved in the mediation shall not take part in the arbitration, whether as a witness or otherwise, and any recommendation made by him in connection with the mediation shall not be relied upon by either Party without the consent of the other Party and of the mediator or neutral, and neither Party shall make use of or rely upon information supplied, positions adopted, or arguments raised, by the other Party in the mediation.
	(i)		Subject to the right of the Parties to seek interim or conservatory relief from a court of competent jurisdiction, as provided below in Section 7.4 (e) neither Party shall be entitled to refer a Dispute to arbitration unless the dispute has first been the subject of an Escalation Notice and been referred to mediation in accordance with Sections 7.2 and 7.3.

7.4

Arbitration

(a)

Any Dispute which has not been resolved by negotiation or mediation as provided herein shall, upon the request of either Party, be referred to and finally resolved by arbitration in accordance with the Arbitration Rules of the London Court of International Arbitration (“LCIA”) then in force (the “LCIA Rules”).

	(b)		The arbitral tribunal shall consist of three arbitrators. The place of arbitration shall be Montréal, Canada. The language of the arbitration shall be English.
	(c)		The costs of the arbitration shall be specified by the arbitral tribunal and shall be borne by the unsuccessful Party, unless the arbitral tribunal, in its discretion, determines a different apportionment, taking all relevant circumstances into account. The costs of arbitration include, in addition to the costs of the arbitration as determined by the LCIA Court under Article 28.1 of the LCIA Rules, the legal and other costs incurred by the Parties, including: (i) the reasonable travel and other expenses of witnesses; (ii) the reasonable fees and expenses of expert witnesses; and (iii) the costs of legal representation and assistance, to the extent that the arbitral tribunal determines that the amount of such costs is reasonable.
	(d)		The arbitral tribunal shall endeavour to issue its award within sixty (60) days of the last hearing of the substantive issues in dispute between the Parties; however, the arbitral tribunal shall not lose jurisdiction if it fails to respect this delay. The arbitral award shall be final and binding.
	(e)		For the purposes of any interim or conservatory measure that may be sought in aid of the arbitration proceedings, the Parties hereby irrevocably submit to the non-exclusive jurisdiction of the competent court in the judicial district of Montréal, Canada, and waive any right to invoke, and they hereby agree not to invoke, any claim of forum non conveniens, inconvenient forum, or transfer or change of venue. Without prejudice to such interim or conservatory remedies as may be obtained from a competent court, the arbitral tribunal shall have full authority to grant interim or conservatory remedies and to award damages for the failure of any Party to respect the arbitral tribunal’s orders to that effect.
	(f)		Neither the Parties (including their auditors and insurers) nor their counsel and any Person necessary to the conduct of the arbitration nor the arbitrators shall disclose the existence, content (including submissions and any evidence or documents presented or exchanged), or outcome of any arbitration hereunder without the prior written consent of the Parties, except as may be required by Applicable Law or the applicable rules of a stock exchange.

7.5		Continuing Obligations
		The existence of a Dispute with respect to this Agreement between the Parties shall not relieve either Party from performance of its obligations under this Agreement that are not the subject of such Dispute.

8.

MISCELLANEOUS

8.1		Construction
		In this Agreement, unless a clear contrary intention appears:

	(a)		the singular number includes the plural number and vice versa;
	(b)		reference to any Person includes such Person’s successors and assigns but, if applicable, only if such successors and assigns are not prohibited by this Agreement, and reference to a Person in a particular capacity excludes such Person in any other capacity or individually;
	(c)		reference to any gender includes each other gender;
	(d)		reference to any agreement, document or instrument means such agreement, document or instrument as amended, modified, supplemented or restated, and in effect from time to time in accordance with the terms thereof subject to compliance with the requirements set forth herein;
	(e)		reference to any Applicable Law means such Applicable Law as amended, modified, codified, replaced or reenacted, in whole or in part, and in effect from time to time, including rules and regulations promulgated thereunder, and reference to any section or other provision of any Applicable Law means that provision of such Applicable Law from time to time in effect and constituting the substantive amendment, modification, codification, replacement or reenactment of such section or other provision;
	(f)		“herein”, “hereby”, “hereunder”, “hereof”, “hereto” and words of similar import shall be deemed references to this Agreement or to the relevant Ancillary Agreement as a whole and not to any particular Article, Section or other provision hereof or thereof;
	(g)		“including” (and with correlative meaning “include”) means including without limiting the generality of any description preceding such term;
	(h)		the Table of Contents and headings are for convenience of reference only and shall not affect the construction or interpretation hereof or thereof;
	(i)		with respect to the determination of any period of time, “from” means “from and including” and “to” means “to but excluding”; and
	(j)		references to documents, instruments or agreements shall be deemed to refer as well to all addenda, exhibits, schedules or amendments thereto.

8.2		Notices
		All notices and other communications under this Agreement shall be in writing and shall be deemed to be duly given (a) on the date of delivery, if delivered personally, (b) on the first Business Day following the date of dispatch if delivered by a nationally recognized next-day courier service, (c) on the date of actual receipt if delivered by registered or certified mail, return receipt requested, postage prepaid or (d) if sent by facsimile transmission, when transmitted and receipt is confirmed by telephone. All notices hereunder shall be delivered as follows:
		If to the Purchaser, to:
		Novelis Inc. 3399 Peachtree Road NE, Suite 1500 Atlanta, Georgia 30326 Fax: 404-814-4272 Attention: General Counsel
		If to the Supplier, to:
		Rio Tinto Alcan Inc. 1188 Sherbrooke Street West Montreal, Quebec H3A 3G2 Fax: 514-848-8115
		Attention: Chief Legal Officer
		Any Party may, by notice to the other Party, change the address or fax number to which such notices are to be given.

8.3   Governing Law

This Agreement shall be governed by and construed and interpreted in accordance with the laws of the Province of Quebec and the laws of Canada applicable therein, irrespective of conflict of laws principles under Quebec law, as to all matters, including matters of validity, construction, effect, enforceability, performance and remedies.

8.4		Judgment Currency
		The obligations of a Party to make payments hereunder shall not be discharged by an amount paid in any currency other than Dollars, whether pursuant to a court

judgment or arbitral award or otherwise, to the extent that the amount so paid upon conversion to Dollars and transferred to an account indicated by the Party to receive such funds under normal banking procedures does not yield the amount of Dollars due, and each Party hereby, as a separate obligation and notwithstanding any such judgment or award, agrees to indemnify the other Party against, and to pay to such Party on demand, in Dollars, any difference between the sum originally due in Dollars and the amount of Dollars received upon any such conversion and transfer.

8.5		Entire Agreement
		This Agreement and the schedules, exhibits, annexes and appendices hereto and the specific agreements contemplated herein, contain the entire agreement between the Parties with respect to the subject matter hereof and supersede all previous agreements, including the Original Agreement and the letter agreement dated July 11, 2007, negotiations, discussions, writings, understandings, commitments and conversations with respect to such subject matter. No agreements or understandings exist between the Parties with respect to the subject matter hereof other than those set forth or referred to herein or therein.
8.6		Severability
		If any provision of this Agreement or the application thereof to any Person or circumstance is determined by a court of competent jurisdiction to be invalid, void or unenforceable, the remaining provisions hereof, or the application of such provision to Persons or circumstances or in jurisdictions other than those as to which it has been held invalid or unenforceable, shall remain in full force and effect and shall in no way be affected, impaired or invalidated thereby, so long as the economic or legal substance of the transactions contemplated hereby is not affected in any manner adverse to any Party. Upon such determination, the Parties shall negotiate in good faith in an effort to agree upon such a suitable and equitable provision to effect the original intent of the Parties.
8.7		Survival
		The obligations of the Parties under Sections 2.6, 2.7, 2.8, 7, 8.14 and 8.15 and liability for the breach of any obligation contained herein shall survive the expiration or earlier termination of this Agreement.
8.8		Execution in Counterparts
		This Agreement may be executed in one or more counterparts, all of which shall be considered one and the same agreement, and shall become effective when one or more counterparts have been signed by each of the Parties and delivered to the other Party.

8.9		Amendments
		No provisions of this Agreement shall be deemed waived, amended, supplemented or modified by any Party, unless such waiver, amendment, supplement or modification is in writing and signed by the authorized representative of the Party against whom it is sought to enforce such waiver, amendment, supplement or modification.
8.10		Waivers
		No failure on the part of a Party to exercise and no delay in exercising, and no course of dealing with respect to, any right, power or privilege under this Agreement shall operate as a waiver thereof, nor shall any single or partial exercise of any right, power or privilege under this Agreement preclude any other or further exercise thereof or the exercise of any other right, power or privilege. The remedies provided herein are cumulative and not exclusive of any remedies provided by Applicable Law.
8.11		No Partnership
		Nothing contained herein or in the Agreement shall make a Party a partner of any other Party and no Party shall hold out the other as such.
8.12		Taxes, Royalties and Duties
		All royalties, taxes and duties imposed or levied on any Molten Metal delivered hereunder (other than any taxes on the income of the Supplier) shall be for the account of and paid by the Purchaser.
8.13		Limitations of Liability
		Neither Party shall be liable to the other Party for any indirect, collateral, incidental, special, consequential or punitive damages, lost profit or failure to realize expected savings or other commercial or economic loss of any kind, howsoever caused, and on any theory of liability (including negligence) arising in any way out of this Agreement.
8.14		Confidentiality

(a)

Subject to Section 8.15, each Party shall hold, and shall cause its respective Group members and its respective Affiliates (whether now an Affiliate or hereafter becoming an Affiliate) and its Representatives to hold, in strict confidence, with at least the same degree of care that applies to its own confidential and proprietary Information, all confidential and proprietary Information concerning the other Group (or any member thereof) that is either in its possession (including Information in its possession prior to the date hereof) or furnished by the other Group (or any member thereof) or by any of its Affiliates (whether now an Affiliate or hereafter becoming an Affiliate) or

			their respective Representatives at any time pursuant to this Agreement or the transactions contemplated hereby (any such Information referred to herein as “Confidential Information”), and shall not use, and shall cause its respective Group members, Affiliates and Representatives not to use, any such Confidential Information other than for such purposes as shall be expressly permitted hereunder or thereunder. Notwithstanding the foregoing, Confidential Information shall not include Information that is or was (i) in the public domain other than by the breach of this Agreement or by breach of any other agreement relating to confidentiality between or among the Parties and/or their respective Group members, their respective Affiliates or Representatives, (ii) lawfully acquired by such Party (or any member of the Group to which such Party belongs or any of such Party’s Affiliates) from a Third Party not bound by a confidentiality obligation, or (iii) independently generated or developed by Persons who do not have access to, or descriptions of, any such confidential or proprietary Information of the other Party (or any member of the Group to which such Party belongs).
	(b)		Each Party shall maintain, and shall cause its respective Group members to maintain, policies and procedures, and develop such further policies and procedures as will from time to time become necessary or appropriate, to ensure compliance with this Section 8.14(a).
	(c)		Each Party agrees not to release or disclose, or permit to be released or disclosed, any Confidential Information to any other Person, except its Representatives who need to know such Confidential Information (who shall be advised of their obligations hereunder with respect to such Confidential Information), except in compliance with Section 8.15. Without limiting the foregoing, when any Information furnished by the other Party after the Effective Time pursuant to this Agreement is no longer needed for the purposes contemplated by this Agreement, each Party will promptly, after request of the other Party and at the election of the Party receiving such request, return to the other Party all such Information in a printed or otherwise tangible form (including all copies thereof and all notes, extracts or summaries based thereon) and destroy all Information in an electronic or otherwise intangible form and certify to the other Party that it has destroyed such Information (and such copies thereof and such notes, extracts or summaries based thereon). Notwithstanding the foregoing, the Parties agree that to the extent some Information to be destroyed or returned is retained as data or records for the purpose of business continuity planning or is otherwise not accessible in the Ordinary Course of Business, such data or records shall be destroyed in the Ordinary Course of Business in accordance, if applicable, with the business continuity plan of the applicable Party.

8.15		Protective Arrangements
		In the event that any Party or any member of its Group or any Affiliate of such Party or any of their respective Representatives either determines on the advice of its counsel that it is required to disclose any Confidential Information (the “Disclosing Party”) pursuant to Applicable Law or receives any demand under lawful process or from any Governmental Authority to disclose or provide Confidential Information of the other Party (or any member of the Group to which such Party belongs), the Disclosing Party shall, to the extent permitted by Applicable Law, promptly notify the other Party prior to the Disclosing Party disclosing or providing such Confidential Information and shall use commercially reasonable efforts to cooperate with the Requesting Party so that the Requesting Party may seek any reasonable protective arrangements or other appropriate remedy and/or waive compliance with this Section 8.15. All expenses reasonably incurred by the Disclosing Party in seeking a protective order or other remedy will be borne by the Requesting Party. Subject to the foregoing, the Disclosing Party may thereafter disclose or provide such Confidential Information to the extent (but only to the extent) required by such Applicable Law (as so advised by legal counsel) or by lawful process or by such Governmental Authority and shall promptly provide the Requesting Party with a copy of the Confidential Information so disclosed, in the same form and format as disclosed, together with a list of all Persons to whom such Confidential Information was disclosed.

[The remainder of this page is intentionally blank.]

IN WITNESS WHEREOF, the Parties hereto have caused this Amended and Restated Molten Metal Supply Agreement to be executed by their duly authorized representatives as of the date first hereinabove written.